Dynapac PL2000F, Instruction Manual

Page: 174 / 283

Operation
163
4812313240.pdf 2017-12-1
Fig. 1. Shut-off valve
2. Filter housing
3. Hose
1
2
3
Operation
Before starting
Preparing for operation
To protect the water system from corrosion and
frost, it is filled with around 5-7litres of antifreeze in
the factory.
Before first starting up the machine, this must be
drained off, collected and disposed of in an
environmentally sound way under due
consideration of local rulings.
- Close shut-off valve (1).
- Unscrew filter housing (2) and drain.
- Open hoses on pumps (3) and run empty.
Observe safety measures (gloves, protective
goggles etc.)
Devices and aids
To prevent delays and to ensure a problem-free
flow of work, before starting work, operators
should check whether all the devices and aids
required for smooth operation are available.
A sufficient quantity of lubrication agents and fuel
substances, tools, spare milling tools and other
spare parts required as well as items of clothing
for personal safety (protective clothing, reflective
jackets, gloves, ear protection) should be
available.