Dynapac PL2000F, Instruction Manual

Page: 31 / 283

Special instructions
20 4812313240.pdf
2017-12-1
High pressure cleaning
Do not spray directly onto electrical
components.
Do not use high pressure cleaning for
dashboard/display.
The Electrical Drive Control and the computer
box may not be washed with high pressure
cleaning and not at all with water. Clean them
with a dry wiper.
Detergent that can destroy electrical parts, or
which is conductive, must not be used.
Place a plastic bag over the fuel filler cap and
secure with a rubber band. This is to avoid high
pressure water entering the vent hole in the
filler cap. This could cause malfunctions, such
as the blocking of filters.
Never aim the water jet directly at the fuel tank
cap. This is particularly important when using a
high-pressure cleaner.
Fire fighting
If the machine catches fire, use an ABC-class
powder fire extinguisher.
A BE-class carbon dioxide fire extinguisher can
also be used.
Battery handling
When removing batteries, always
disconnect the negative cable first.
When fitting batteries, always connect the
positive cable first.
Dispose of old batteries in an environmentally
friendly way. Batteries contain toxic lead.
Do not use a quick-charger for charging the
battery. This may shorten battery life.