Dynapac PL2000F, Instruction Manual

Page: 47 / 283

Machine description
36 4812313240.pdf
2017-12-1
gear are configured specially for the milling
drum drives and finely tuned to the engine
rating of the machine.
-
Material is removed by the process of
upwilling – if the machine is moving from left
to right, the drum will rotate anti-clockwise.
The professional milling tool arrangement and
equipping with the best milling tools ensures
rapid and clean milling as well as high milling
tool downtimes
The milling drum housing seals off the milling
drums to the left and right through the side
boards, the sliding shoe to the front, the
moldboard to the rear, in all milling depths and
therefore ensures optimum material pickup and a
clean milling surface.
The side shields are fitted with replaceable,
zero-wear hard metal plates to increase their
service life.
Traction system, steering system, brakes
- Traction system
Four large track units, suspended on the strut
towers, hydrostatically driven and fitted with
sensor-monitored anti-slip control are equipped
with slip-free plastic pads. They provide excellent
traction when cornering and in all working
positions.
The speed limits required can be set beforehand
using the button provided or can be changed during
operations. The control lever of the travel drive then
allows the speed to be gradually adjusted in this
driving range for both forwards and reverse travel.