Dynapac PL2000F, Instruction Manual

Page: 198 / 283

Miscellaneous
187
4812313240.pdf 2017-12-1
Hydraulically foldable discharge conveyor
Folding in the discharge conveyor
The machine’s transport length can be
significantly reduced in a few simple steps by
using hydraulic foldable discharge conveyor.
To fold the discharge conveyor, various
preconditions must be checked and/or satisfied.
Machine has been moved out of its milling track
and is therefore on as level a base as possible.
Discharge conveyor is in its working position.
Milling drum is not activated.
- Loading and discharge conveyors are not
being operated.
Steps required for folding process:
1. Firstly raise machine as far forward as
possible over traction unit legs then lower as
far as possible to the rear.
2. Ensure that the distance between the bit of
milling drum and the ground is more than
150mm.
3. While the Button (18) is being pressed, the
conveyor continues being folded in until the
button is released.
4. Once the discharge conveyor is folded in
completely, release Button (18) to finish this
process.
See button function description from “Machine
description” chapter.
18 17
Fig. Switch panel;
Foldable conveyor