Dynapac PL2000F, Instruction Manual

Page: 139 / 283

Machine description
128
4812313240.pdf
2017-12-1
2
3
High pressure cleaner
The hose reel (1) of the high pressure
cleaner can be found on the top of
accessory box at the rear of the machine.
The spray pistol (2) is locked in its detent
by a cotter pin (3).
- Remove cotter pin.
- Remove spray pistol from bracket.
- Pull hose out of fixture until you hear a
click.
When released, the hose automatically
engages here.
‐
The hose will automatically roll back
up again if pulled and released again.
‐
The high-pressure jet is started by
pressing the trigger (4).
(Only if the high pressure cleaner
function is activated.)
When cleaning heavily
contaminated areas, note that particles
of dirt may be flung in all directions.
Danger of accidents.
When cleaning, never direct water
jet of high pressure cleaner towards
electrical components such as sensors,
connection boxes, operating panels,
electric distributors etc.!
Fig. High pressure cleaner
1. Hose reel
2. Spray pistol
3. Cotter pin
4. Trigger
1
3
2
4