Dynapac PL2000F, Instruction Manual

Page: 228 / 283

Maintenance
217
4812313240.pdf
2017-12-1
Engine oil drainage point
The drainage point for the engine and gear oil is in
the rear section of the machine underside.
The stopcock (2) has three switch positions:
-Closed (2A)
-Drain for engine oil (2B)
-Drain for pump distribution transmission (2C)
Danger of scalding due to hot oil.
Collect used oil in a suitable container and
dispose of property.
Leave engine to warm up slightly for oil change.
Unscrew seal cap (1) and open stop cock (2) in
position (2B). After draining, close the stopcock in
position (2A), fit the seal cap (1) with a new seal
and screw back on.
Add new oil using the filler (behind the left
maintenance hatch of the driver’s platform).
Check the level using the dipstick (behind the
middle hatch of the driver’s platform).
Before checking with the dipstick, wait a moment;
the added oil must first flow into the oil pan.
Follow Engine operating instructions!
Fig. 1. Seal cap
2. Stopcock