Dynapac PL2000F, Instruction Manual

Page: 158 / 283

Machine description
147
4812313240.pdf 2017-12-1
Bits replacement
Dismantling the bits
‐ Position the bit extractor in the hole at the rear
of the bit box, and drive out worn and
damaged bit by hitting with a hammer.
Optionally, a pneumatically operated hammer that
can be driven using the compressed air system of
the machine is available.
Mounting the bits
‐
Drive the new bit into the bit box with a copper,
brass or hard plastic hammer.
Do not use a steel hammer to drive the bits
into the holders, this can lead to the destruction of
the top of the bit.
Danger of injury from flaking-off pieces
of metal.
After mounting the bit ensure that the milling
bit can be turned. Stuck bits wear out
asymmetrically and quickly.