Dynapac PL2000F, Instruction Manual

Page: 135 / 283

Machine description
124
4812313240.pdf
2017-12-1
Hydraulic folding roof operation
The hydraulically folded roof (1) is locked to
the rear suspension of the left and right-hand
side of the machine by a lock pin (2).
The key-operated switch (4) for actuating the
folding roof and hood hydraulics can be found
to the left of the belt drive’s protective box.
The roof can be raised and lowered without
the drive engine having to be started.
- Pull out the lock pin (2).
- Check that the changeover valve (3) (under
the compensation tank behind the
maintenance flap) is in position (A).
- To lower the roof, turn the key-operated
switch (4) to the left until the roof has lowered
to its minimum level.
Risk of crushing! Ensure that no one reaches
into the joint areas or the areas into which the
roof is to be lowered during the folding
process as there is a risk that fingers and
hands will be crushed.
- To raise the roof again, turn the
key-operated switch (4) to the right until
the roof has risen to its maximum height.
- Insert pin (2) on both sides of the machine.
Fig. 1. Roof
2. Pin
3. Valve
4. Switch
1
2