Dynapac PL2000F, Instruction Manual

Page: 140 / 283

Machine description
129
4812313240.pdf 2017-12-1
Filling pump for water tank
The filling pump for the water tank is located
at the front left of the machine.
To fill the water tank:
- Unscrew seal cap (1) (if necessary use
wrench)
- Attach suction line and tighten
- Start filling process by pressing switch (2).
- Switch off filling pump as soon as the level
water required is reached in the water
tank (monitor using the LCD display on
the operating panel.)
An overflow can be found on the underside of
the machine. Excess water flows out through
this if overfilled.
Ensure that the water is not too heavily
contaminated because this may result in
lengthy filter changes and cleaning work in
the tank.
Fig. 1. Seal cap
1
Fig. 2. Switch
2