Dynapac PL2000F, Instruction Manual

Page: 208 / 283

Preventive maintenance
197
4812313240.pdf
2017-12-1
Preventive maintenance
Complete maintenance is necessary for the
machine to function satisfactorily and at the
lowest possible cost.
The maintenance section includes the periodic
maintenance that must be carried out on the
machine.
The recommended maintenance intervals
assume that the machine is used in a normal
environment and working conditions.
Acceptance and delivery inspection
The machine is tested and adjusted before it
leaves the factory.
On arrival, before delivery to the customer,
delivery inspection must be conducted as per the
check list in the warranty document.
Any transport damage must be immediately
reported to the transport company.
Warranty
The warranty is only valid if the stipulated
delivery inspection and the separate service
inspection have been completed as per the
warranty document, and when the machine has
been registered for starting under the warranty.
The warranty is not valid if damage has been
caused by inadequate service, incorrect use of
the machine, the use of lubricants and hydraulic
fluids other than those specified in the manual, or
if any other adjustments have been made without
the requisite authorization.