Dynapac PL2000F, Instruction Manual

Page: 170 / 283

Machine description
159
4812313240.pdf 2017-12-1
Setting the sensor sensitivity:
1) From the working window switch to the menu item Configuration menu and then
to the parameter Sensitivity.
2) Call up the parameter Sensitivity and set the desired values for the active
sensors.
86 79
Change value Change value
HELP SAVE CANCEL
3) Save the set value(s) and return to the working window.
Please note: If the same type of sensor is chosen for both the left and the right control
loop of the MLS 508 (e.g. the system operates with Sonic-Ski sensors in ground
sensing mode on the left side as well as on the right side), you will be asked during the
storing process whether a change in the sensitivity settings of one sensor shall
automatically bring about the same change in the sensitivity settings of the identical
sensor on the other side.
SENSITIVITY
Set Sensitivity for both side?
Change value
HELP ENTER CANCEL
Sensitivity
Y