Dynapac PL2000F, Instruction Manual

Page: 83 / 283

Machine description
72 4812313240.pdf
2017-12-1
Pos. Designation Symbol Brief description
1
Emergency
stop
Press in emergencies (people in danger, risk
of collision etc. )!
- The engine, drive units and steering are
disengaged whenever the EMERGENCY
STOP button is pressed.
No movement, e.g. of the lower conveyor, is
then possible! Risk of accident!
- Seven emergency stops are located on the
left/right console, ergo box and four ground
plate control boxes respectively. Any of it
being pressed shall be indicated in the
display.
- To restart the engine, all EMERGENCY
STOP buttons must be in the upright
position.
2
Control lever
for steering
Steering mode is controlled by the dual-axis
control lever.
- Push the control lever forward, the front
drive units are swiveled to the
straight-forward position.
- Pull it backward, the rear drive units are
swiveled to the straight-forward position.
- Turn it to the left, the rear drive units are
swiveled to the right and the planer turns to
the left.
- Turn it to the right, the rear drive units are
swiveled to the left and the planer turns to
the right.
- Rotate the knob clockwise, the planer is
switched to crab steering mode, the steering
angle of rear drive will follow the front ones in
positive direction. LED on the right is
activated. Any movement of control lever will
make the planer exit from this mode.
- Rotate the knob anticlockwise, the planer is
switched to all steering mode, the steering
angle of the rear units will follow the front
one in negative direction, LED on the left is
activated. Any movement of the control lever
will make the planer exit from this mode.