Dynapac PL2000F, Instruction Manual

Page: 89 / 283

Machine description
78 4812313240.pdf
2017-12-1
Pos. Designation Symbol Brief description
3
Raising/lowering
front left side of
vehicle
While the joystick is being pulled
upward/downward, the front left strut tower is
extended/retracted and the body of vehicle is
raised/lowered continuously until it reaches its
upper/lower limit position.
This function is related to the leveling control
system. When the leveling system of planer is
in auto mode, operate the joystick, it will be
switched to manual mode in which the cylinder
is controlled by the operator. When the joystick
is released (in the neutral position), it will be
automatically shifted to auto mode again.
4
Raising/lowering
front right side
of vehicle
While the joystick is being pulled
upward/downward, the front right strut tower
cylinder is extended/retracted and the body of
vehicle is raised/lowered continuously until it
reaches its upper/lower limit position.
This function is related to the leveling control
system. When the leveling system of planer is
in auto mode, operate the joystick, it will be
switched to manual mode in which the cylinder
is controlled by the operator. When the joystick
is released (in the neutral position), it will be
automatically shifted to auto mode again.
5
Raising/lowering
rear of vehicle
While the joystick is being pulled
upward/downward, the rear strut towers are
extended/retracted and the rear of the vehicle
is raised/lowered continuously until they/it
reaches its upper/lower limit position.
6
Floating switch
for scraper
blade
The scraper blade is in floating position by
pressing the upper position of the switch, while
it is locked by pressing the lower position.
It is defaults to locking state when the system is
supplied with power.
7
Raising/lowering
scraper blade
While the upper position of the button is being
pressed, the scraper blade continues being
raised until it reaches to its upper limit position.
While the lower position of the button is being
pressed, the scraper blade continues being
lowered until it reaches to its lower limit
position.