Dynapac PL2000F, Instruction Manual

Page: 197 / 283

Miscellaneous
186 4812313240.pdf
2017-12-1
Normal on-road travel
The machine is not intended for normal on-road
travel and is not equipped for such circumstances.
It should be used within enclosed building sites.
If the machine’s loading or unloading area is
outside an enclosed building site or if the machine
has to propel itself from one section of the
roadworks to another, the machine must be
dual-manned for safety reasons. All safety
measures (cordoning off) required for this should
be implemented.
If a machine has to be parked on a public
highway, it should be cordoned off in accordance
with the relevant regulations and secured to
prevent the machine from rolling away, tilting or
swiveling.
If the machine components protrude into another
lane of traffic during milling or maneuvering, this
should be briefly cordoned off until the hazard has
passed.
The rotary beacons and hazard flasher are
permanently activated during milling and
transport, the warning signs on the machine are
permanently folded down.
If necessary, the machine should always be used
on the nearside, away from oncoming traffic.
For relocation or during journeys required over a
long distance (distance>1km), the machine
should be transported on its transporter for
technical and safety reasons