Dodge 2014 Ram 1500 Owner'S Manual Download Page 314 | Manualshive

Page: 314 / 360

background image

CAUTION!

(Continued)

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (an-
tifreeze) is not recommended.

Adding Coolant

Your vehicle has been built with an improved engine
coolant (OAT coolant conforming to MS.90032) that al-
lows extended maintenance intervals. This engine cool-
ant (antifreeze) can be used up to ten years or 150,000
miles (240,000 km) before replacement. To prevent reduc-
ing this extended maintenance period, it is important that

you use the same engine coolant (OAT coolant conform-
ing to MS.90032) throughout the life of your vehicle.

Please review these recommendations for using Organic
Additive Technology (OAT) engine coolant (antifreeze)
that meets the requirements of FCA Material Standard
MS.90032. When adding engine coolant (antifreeze):

•

We recommend using MOPAR® Antifreeze/Coolant
10 Year/150,000 Mile Formula OAT (Organic Additive
Technology) that meets the requirements of FCA Ma-
terial Standard MS.90032.

•

Mix a minimum solution of 50% OAT engine coolant
that meets the requirements of FCA Material Standard
MS.90032 and distilled water. Use higher concentra-
tions (not to exceed 70%) if temperatures below −34° F
(−37° C) are anticipated.

•

Use only high purity water such as distilled or deion-
ized water when mixing the water/engine coolant

312

MAINTAINING YOUR VEHICLE

«
...
312
313
314
315
316
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Calira Pages: 14

Brand: TBC Pages: 12

Intercooler Kit Type 31

Brand: GReddy Pages: 9

Brand: Phonocar Pages: 2

Brand: BMW Pages: 38

Brand: Road Ranger Pages: 22

Brand: H&S Pages: 32

Brand: Mobility Networks Pages: 52

Brand: Linear Logic Pages: 8

Brand: Volvo Pages: 123

Brand: Ford Pages: 2

Brand: Mopar Pages: 17

Brand: Peiying Pages: 32

Brand: Yakima Pages: 28

Brand: Kuda Pages: 3

Brand: Volvo Pages: 7

Brand: Buick Pages: 58

Brand: Westin Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands