Dodge 2014 Ram 1500 Owner'S Manual Download Page 166 | Manualshive

Page: 166 / 360

background image

in the Electronic Vehicle Information (EVIC) section
under the heading of Diesel Exhaust Fluid (DEF) Warn-
ing Messages.

25. Electric Power Steering Malfunction Warning Light

This telltale is on when the Electric Power
Steering is not operating and needs service.

26. Electronic Throttle Control (ETC) Light

This light informs you of a problem with the
Electronic Throttle Control (ETC) system. The
light will come on when the ignition is first
turned ON and remain on briefly as a bulb

check. If the light does not come on during starting, have
the system checked by an authorized dealer.

If a problem is detected, the light will come on while the
engine is running. Cycle the ignition key when the
vehicle has completely stopped and the shift lever is

placed in the PARK position. The light should turn off.

If the light remains lit with the engine running, your
vehicle will usually be drivable. However, see an autho-
rized dealer for service as soon as possible. If the light is
flashing when the engine is running, immediate service is
required. You may experience reduced performance, an
elevated/rough idle or engine stall and your vehicle may
require towing.

27. Air Suspension Normal Ride Height Indicator Lamp
— If Equipped

This light will illuminate when the air suspension system
is set to the Normal Ride Height setting. For further
information, refer to “Air Suspension System” in “Start-
ing And Operating”.

164

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
164
165
166
167
168
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: RaceChip Pages: 20

Brand: Vaisala Pages: 24

10-8002-C11998B

Brand: Saleen Pages: 12

2013 Buick Verano

Brand: Buick Pages: 5

Brand: Whispbar Pages: 15

v.LOGiC Intelligent Solution V5-NTG46

Brand: Caraudio-Systems Pages: 18

Brand: Ford Pages: 8

Brand: Intec Pages: 16

Brand: ULTIMATE SPEED Pages: 50

HU-4421-XL-SDK01

Brand: FALCON RIDGE Pages: 5

Brand: JKS Pages: 6

Brand: Veldo Teknoloji Pages: 32

Brand: travall Pages: 4

FlashLogic FLC-FORS-FO1B-FLRSFO1-EN

Brand: ADS Pages: 25

Brand: PUTCO Pages: 3

Brand: Ranger design Pages: 22

Brand: TracRac Pages: 6

Brand: Cadillac Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands