Dodge 2014 Ram 1500 Owner'S Manual Download Page 126 | Manualshive

Page: 126 / 360

background image

NOTE:

If the vehicle is exposed to extreme cold (below

20°F or -7°C), or is required to operate at colder-than-
normal conditions for prolonged periods, use climatized
No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50%
No. 1 diesel fuel. This will provide better protection from
fuel gelling or wax-plugging of the fuel filter.

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine
damage and may decrease corrosion protection.
Organic Additive Technology (OAT) engine cool-
ant is different and should not be mixed with
Hybrid Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any “globally compat-
ible” coolant (antifreeze). If a non-OAT engine

(Continued)

CAUTION!

(Continued)

coolant (antifreeze) is introduced into the cooling
system in an emergency, the cooling system will
need to be drained, flushed, and refilled with fresh
OAT coolant (conforming to MS-12106), by an
authorized dealer as soon as possible.

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (an-
tifreeze) is not recommended.

124

MAINTAINING YOUR VEHICLE

«
...
124
125
126
127
128
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Carax Pages: 2

PRIME DESIGN VBI-FT21B

Brand: Safe Fleet Pages: 12

Plusone Console 4521011B

Brand: Honda Pages: 4

Brand: iOttie Pages: 58

Brand: Tesla Pages: 274

Brand: Ferve Pages: 28

Brand: Brodit Pages: 2

Brand: Buick Pages: 161

Brand: Yakima Pages: 11

2011 Camry SE V6

Brand: Toyota Pages: 33

Brand: PUTCO Pages: 3

Brand: Oldsmobile Pages: 340

Automobille 2004 Century

Brand: Buick Pages: 12

Brand: Or-Fab Pages: 3

Brand: Lincoln Pages: 370

Brand: X-Armour Pages: 16

Brand: Weather Guard Pages: 8

Brand: Discount Car Stereo Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands