Dodge 2014 Ram 1500 Owner'S Manual Download Page 313 | Manualshive

Page: 313 / 360

background image

engine coolant (antifreeze) from the radiator drain cock.
The radiator drain cock is located in the lower radiator
tank. If the cap is sealing properly, the engine coolant
(antifreeze) will begin to drain from the coolant expan-
sion bottle. DO NOT REMOVE THE COOLANT PRES-
SURE CAP WHEN THE COOLING SYSTEM IS HOT.

Cooling System — Drain Flush And Refill

If the engine coolant (antifreeze) is dirty or contains a
considerable amount of sediment, clean and flush with a
reliable cooling system cleaner. Follow with a thorough
rinsing to remove all deposits and chemicals. Properly
dispose of old engine coolant (antifreeze).

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Selection Of Coolant

Refer to “Fluids, Lubricants, and Genuine Parts” in
“Maintaining Your Vehicle” for further information.

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine
damage and may decrease corrosion protection.
Organic Additive Technology (OAT) engine cool-
ant is different and should not be mixed with
Hybrid Organic Additive Technology (HOAT) en-
gine coolant (antifreeze) or any “globally compat-
ible” coolant (antifreeze). If a non-OAT engine
coolant (antifreeze) is introduced into the cooling
system in an emergency, the cooling system will
need to be drained, flushed, and refilled with fresh
OAT coolant (conforming to MS-12106), by an
authorized dealer as soon as possible.

(Continued)

6

MAINTAINING YOUR VEHICLE

311

«
...
311
312
313
314
315
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

Brand: Doug Thorley Headers Pages: 5

Brand: Edelbrock Pages: 2

Brand: Acura Pages: 2

Brand: Renault Pages: 238

Brand: Thule Pages: 12

Brand: Metra Electronics Pages: 20

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

V70XC Cross country 1998

Brand: Volvo Pages: 262

Brand: TATA Motors Pages: 232

Brand: Smappee Pages: 28

Brand: Kleinn Air Horns Pages: 33

Brand: Yakima Pages: 10

Brand: Directed Pages: 24

Brand: Wabtec Pages: 216

FreshSesh PowderHound

Brand: Yakima Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands