Dodge 2014 Ram 1500 Owner'S Manual Download Page 199 | Manualshive

Page: 199 / 360

background image

7. Press and release the

Up

arrow button to exit the EVIC

screen once the Fuel Filter Life is 100%

NOTE:

If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Oil Life Reset

Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the
next scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.

NOTE:

Use the steering wheel EVIC controls for the

following procedure(s)

Vehicles Equipped With Passive Entry

1. Without pressing the brake pedal, press the ENGINE

START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine.)

2. Press and release the

DOWN

arrow button to scroll

downward through the main menu to “Vehicle Info”.

3. Press and release the

RIGHT

arrow button to access

the ”Oil Life” screen.

4. Press and hold the

RIGHT

arrow button for one

second to access the ”Oil Life Reset” screen.

5. Press and release the

DOWN

arrow button to select

“Yes”, then press and release the Right arrow button to
select reset of the Oil Life.

6. Press and release the

Up

arrow button to exit the EVIC

screen.

3

UNDERSTANDING YOUR INSTRUMENT PANEL

197

«
...
197
198
199
200
201
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Toyota Pages: 56

Brand: Camcar Pages: 2

Brand: Suzuki Pages: 353

Brand: Torklift Pages: 16

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

Brand: Chariot Carriers Pages: 3

CB-796IG2-CIGD-R

Brand: CARRYBOY Pages: 4

Brand: GMC Pages: 428

Brand: Ford Pages: 368

Ride-Rite Air Helper Springs 2173

Brand: Firestone Pages: 4

Brand: Hyundai Pages: 280

Brand: TATA Motors Pages: 92

Brand: Subaru Pages: 16

Brand: Mobility Networks Pages: 52

51 47 0 027 792

Brand: BMW Pages: 7

Brand: Ford Pages: 728

Brand: Westin Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands