Dodge 2014 Ram 1500 Owner'S Manual Download Page 186

Page: 186 / 360

Vehicles Equipped With Passive Entry

1. Without pressing the brake pedal, press the ENGINE

START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine.)

2. Press and release the

DOWN

arrow button to scroll

downward through the main menu to “Vehicle Info”.

3. Press and release the

RIGHT

arrow button to access

the ”Fuel Filter Life” screen.

4. Press and release the

DOWN

arrow button to select

“Reset”, then press and release the

Right

arrow button

to select reset of the Fuel Filter Life to 100%.

5. Press and release the

arrow button to exit the EVIC

screen.

Vehicles Not Equipped With Passive Entry

1. Without pressing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine.)

2. Press and release the

DOWN

arrow button to scroll

downward through the main menu to “Vehicle Info”.

3. Press and release the

RIGHT

arrow button to access

the ”Fuel Filter Life” screen.

4. Press and release the

DOWN

arrow button to select

“Reset”, then press and release the

Right

arrow button

to select reset of the Fuel Filter Life to 100%.

5. Press and release the

arrow button to exit the EVIC

screen.

NOTE:

If the indicator message illuminates when you

start the vehicle, the Fuel Filter indicator system did not
reset. If necessary, repeat this procedure.

Oil Life Reset

Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
will flash in the EVIC display for approximately 10
seconds after a single chime has sounded, to indicate the

184

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Search results

Summary of Contents for 2014 Ram 1500

Reviews:

Related manuals for 2014 Ram 1500

Brands by name

Popular brands

Dodge 2014 Ram 1500, Owner'S Manual

Search results

Summary of Contents for 2014 Ram 1500

Reviews:

Related manuals for 2014 Ram 1500

Brands by name

Popular brands