Dodge 2014 Ram 1500 Owner'S Manual Download Page 25 | Manualshive

Page: 25 / 360

background image

reminder light will flash or remain on continuously. Refer
to “Occupant Restraints” in “Things To Know Before
Starting Your Vehicle” for further information.

9. Air Bag Warning Light

This light will turn on for four to eight seconds
as a bulb check when the ignition switch is first
turned to ON/RUN. If the light is either not on
during starting, stays on, or turns on while

driving, have the system inspected at an authorized
dealer as soon as possible. Refer to “Occupant Restraints”
in “Things To Know Before Starting Your Vehicle” for
further information.

10. Engine Oil Pressure

The pointer should always indicate some oil pressure
when the engine is running. A continuous high or low
reading under normal driving conditions may indicate a
lubrication system malfunction. Immediate service
should be obtained from an authorized dealer.

If the gauge pointer moves to either extreme of the gauge,
the Check Gauges indicator will illuminate and a single
chime will sound.

11. Speedometer

The speedometer shows the vehicle speed in miles per
hour and/or kilometers per hour (mph/km/h).

12. Park/Headlight ON Indicator — If Equipped

This indicator will illuminate when the park
lights or headlights are turned on.

13. Cargo Light

The cargo light will illuminate when the cargo
light is activated by pressing the cargo light
button on the headlight switch.

3

UNDERSTANDING YOUR INSTRUMENT PANEL

23

«
...
23
24
25
26
27
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Ignition Pages: 1

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Reference Series

Brand: OEM Audio Pages: 29

Brand: XTC Pages: 4

Brand: Cadillac Pages: 522

Brand: Mercedes-Benz Pages: 358

Brand: Meta System Pages: 16

Brand: E&G Classics Pages: 3

Brand: DriveRight Pages: 16

Brand: GARO Pages: 15

Brand: Summit Racing Pages: 11

Filtercharger 57-9004

Brand: K&N Engineering Pages: 4

Brand: Honda Pages: 219

Brand: 3UVIEW Pages: 15

Brand: P-Charge Pages: 16

Brand: Chevrolet Pages: 340

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands