Dodge 2014 Ram 1500 Owner'S Manual Download Page 252 | Manualshive

Page: 252 / 360

background image

•

No. 1 Ultra Low Sulfur diesel fuel should only be used
where extended arctic conditions (-10°F or -23°C) exist.

Bio-Diesel Fuel Requirements

Chassis Cab Models

A maximum blend of 5% biodiesel meeting ASTM speci-
fication D975 may be used with your Cummins diesel
engine. If operation with Biodiesel blends greater than
5% but not greater than 20% (B6-B20) is desired, the truck
must first be reconfigured by an authorized Ram dealer
and the provisions in the following section must be
adhered to.

Pickup Models And Chassis Cab Models Ordered
With B20 Option

Your vehicle has been validated and approved for the use
of Biodiesel in blends up to 20% (B20) provided that you

comply with the requirements outlined below. It is im-
portant that you understand and comply with these
requirements. Failure to comply with Oil Change require-
ments for vehicles operating on biodiesel blends up to
B20 will result in premature engine wear. Such wear is
not covered by the New Vehicle Limited Warranty.

Biodiesel is a fuel produced from renewable resources
typically derived from animal fat, rapeseed oil (Rapeseed
Methyl Ester (RME) base), or soybean oil (Soy Methyl
Ester (SME or SOME) base). Biodiesel fuel has inherent
limitations which require that you understand and ad-
here to the following requirements if you use blends of
Biodiesel greater then 5% but not greater than 20%
(B6-B20). There are no unique restrictions for the use of
B5. Use of blends greater than 20% is not approved. Use
of blends greater than 20% can result in engine damage.
Such damage is not covered by the New Vehicle Limited
Warranty.

250

STARTING AND OPERATING

«
...
250
251
252
253
254
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Q'STRAINT Pages: 10

Brand: Metra Electronics Pages: 2

Brand: Camcar Pages: 6

Brand: ABL Pages: 4

Q Access Alpha GSE 2023

Brand: Q Mobility Group Pages: 9

Brand: Xblitz Pages: 30

Brand: Mitsubishi Pages: 19

Brand: Oldsmobile Pages: 354

Brand: Curtis Pages: 6

Security Cage Kit

Brand: Toro Pages: 8

Charger SRT 392 2017

Brand: Dodge Pages: 576

Brand: Lexus Pages: 108

Tipper Remote Kit

Brand: Nugent Pages: 21

Brand: Volkswagen Pages: 188

Brand: Yakima Pages: 8

Brand: HAUL MASTER Pages: 4

IONIQ HYBRID 2019

Brand: Hyundai Pages: 16

Countryman Cooper S

Brand: Mini Pages: 244

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands