Dodge 2014 Ram 1500 Owner'S Manual Download Page 240 | Manualshive

Page: 240 / 360

background image

The “TOW/HAUL Indicator Light” will illuminate in the
instrument cluster to indicate that TOW/HAUL mode
has been activated. Pressing the switch a second time
restores normal operation. Normal operation is always
the default at engine start-up. If TOW/HAUL mode is
desired, the switch must be pressed each time the engine
is started.

WARNING!

Do not use the “TOW/HAUL” feature when driving
in icy or slippery conditions. The increased engine
braking could cause the rear wheels to slide, and the
vehicle to swing around with the possible loss of
vehicle control, which could cause an accident possi-
bly resulting in personal injury or death.

Torque Converter Clutch

A feature designed to improve fuel economy has been
included in the automatic transmission on your vehicle.
A clutch within the torque converter engages automati-
cally at calibrated speeds. This may result in a slightly
different feeling or response during normal operation in
the upper gears. When the vehicle speed drops or during
some accelerations, the clutch automatically disengages.

TOW/HAUL Switch

238

STARTING AND OPERATING

«
...
238
239
240
241
242
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

2005 Sierra Denali

Brand: GMC Pages: 428

Brand: Mercedes-Benz Pages: 346

Brand: Thule Pages: 4

Brand: Brodit Pages: 2

Brand: Mercedes-Benz Pages: 39

2013 GMC Savana

Brand: GMC Pages: 398

Brand: Aries Pages: 5

Brand: Mercedes-Benz Pages: 354

Brand: Gator Pages: 6

Brand: F.lli Menabo Pages: 16

Brand: Billien Pages: 2

Brand: Lexus Pages: 28

Brand: Kuda-Phonebase Pages: 3

Brand: Audiovox Electronics Pages: 12

Brand: Metra Electronics Pages: 8

Brand: Sanixair Pages: 20

OMNI-BIKE plus Caravan Special

Brand: OMNISTOR Pages: 4

Brand: iDataLink Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands