Dodge 2014 Ram 1500 Owner'S Manual Download Page 251 | Manualshive

Page: 251 / 360

background image

CAUTION!

If the “Water in Fuel Indicator Light” remains on, DO
NOT START engine before you drain the water from
the fuel filter(s) to avoid engine damage. Refer to
“Maintenance Procedures/Draining Fuel/Water Sepa-
rator Filter” in “Maintaining Your Vehicle” for fur-
ther information.

Fuel Specifications

The Cummins® diesel engine has been developed to take
advantage of the high energy content and generally
lower cost No. 2 Ultra Low Sulfur diesel fuel or No. 2
Ultra Low Sulfur climatized diesel fuels. Experience has
shown that it also operates on No. 1 Ultra Low Sulfur
diesel fuels or other fuels within specification.

NOTE:

•

If you accidentally fill the fuel tank with gasoline on
your diesel vehicle, Do not start the vehicle. If you
restart your vehicle you risk damage the engine and
fuel system. Please call your local dealer for service.

•

A maximum blend of 5% biodiesel meeting ASTM
specification D-975 may be used with your Cummins®
diesel engine. (Chassis Cab models not configured
with B20 capability.)

•

A maximum blend of 20% biodiesel meeting ASTM
specification D-7467 may be used with your Cum-
mins® diesel engine. (Pickup models and Chassis Cab
models configured with B20 Capability.)

•

In addition, commercially available fuel additives are
not necessary for the proper operation of your Cum-
mins® diesel engine.

4

STARTING AND OPERATING

249

«
...
249
250
251
252
253
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Intercooler Kit Type 31

Brand: GReddy Pages: 9

Brand: Saab Pages: 445

Brand: Yakima Pages: 12

Brand: FALCON RIDGE Pages: 6

Brand: Linear Logic Pages: 8

Hatch-bag Luggage System

Brand: Tabernus Peram Pages: 10

Brand: Saturn Pages: 440

Magic Watch MWE-850-4DSM

Brand: Waeco Pages: 204

Brand: Cadillac Pages: 20

Brand: Pyle Pages: 8

Brand: SSV Works Pages: 2

Brand: HUSKY LINERS Pages: 4

Brand: iOttie Pages: 19

Brand: Yakima Pages: 9

Brand: Gator Pages: 5

Brand: Yakima Pages: 12

Brand: Quadratec Pages: 8

MKZ HYBRID 2016

Brand: Lincoln Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands