Dodge 2014 Ram 1500 Owner'S Manual Download Page 237 | Manualshive

Page: 237 / 360

background image

5. Restart the engine.

6. Shift into the desired gear range. If the problem is no

longer detected, the transmission will return to normal
operation.

NOTE:

Even if the transmission can be reset, we recom-

mend that you visit your authorized dealer at your
earliest possible convenience. Your authorized dealer has
diagnostic equipment to determine if the problem could
recur.

If the transmission cannot be reset, authorized dealer
service is required.

Electronic Range Select (ERS) Operation

The Electronic Range Select (ERS) shift control allows the
driver to limit the highest available gear when the
transmission is in DRIVE. For example, if you shift the

transmission into 4 (fourth gear), the transmission will
not shift above fourth gear, but will shift through the
lower gears normally.

You can switch between DRIVE and ERS mode at any
vehicle speed. When the shift lever is in the DRIVE
position, the transmission will operate automatically,
shifting between all available gears. Tapping the ERS (-)
switch will activate ERS mode, display the current gear in
the instrument cluster, and maintain that gear as the top
available gear. Once in ERS mode, tapping the ERS (-) or
(+) switch will change the top available gear.

4

STARTING AND OPERATING

235

«
...
235
236
237
238
239
...
»

Summary of Contents for 2014 Ram 1500









































































































































































































































































































































































Reviews:

No comments

Related manuals for 2014 Ram 1500

Brand: Daihatsu Pages: 340

PRIME DESIGN VCR 326

Brand: Safe Fleet Pages: 16

Prime Design VBC PC11

Brand: Safe Fleet Pages: 8

Prime Design AR1418

Brand: Safe Fleet Pages: 4

Brand: Whispbar Pages: 16

signal mirror 2005-2009 Ford Mustang

Brand: muth Pages: 9

Brand: Whispbar Pages: 14

Brand: Voxoa Pages: 48

Brand: Hella Pages: 21

Brand: Oldsmobile Pages: 354

Brand: KLAUS Multiparking Pages: 72

Powerbuilt 648601

Brand: AllTrade Pages: 3

SportQuest Series

Brand: Perrycraft Pages: 2

Brand: Metra Electronics Pages: 12

Brand: Front Runner Pages: 7

Brand: Whispbar Pages: 15

Brand: GEMINI TECHNOLOGY Pages: 9

Brand: Ranger design Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands