Club Car 1996 DS Golf Car Gasoline, Service Manual

Page: 81 / 544

Page 7-5
G
E
7
10. Use a brush to apply a liberal amount of white lithium NLGI #2 grease (Dow Corning BR2-Plus or
equivalent) on each of the six raised bosses on the brake backing plate (See Figure 7-8). See WARN-
ING at bottom of page 7-4.
11. Use a brush to apply a liberal amount of white lithium NLGI #2 grease (Dow Corning BR2-Plus or
equivalent) to each end of both brake shoes and into the slots in the brake shoe mounting block as
shown (See Figure 7-9). See WARNING at bottom of page 7-4.
FIGURE 7-6 FIGURE 7-7
FIGURE 7-8 FIGURE 7-9
FIGURE 7-10 FIGURE 7-11
1
2
3 LUBRICATE SLIDE (1) AND SLIDE
PLATE (2) WITH DRY GRAPHITE
LUBRICANT. THEN WORK THE
SLIDE BACK AND FORTH
1
2
USE A BRUSH TO
APPLY A LIBERAL AMOUNT
OF WHITE LITHIUM NLGI #2 GREASE
TO EACH OF THE SIX RAISED BOSSES.
BOSSES
BOSSES
;;
;;
yy
yy
;;
;;
yy
yy
USE A BRUSH TO APPLY A
LIBERAL AMOUNT OF WHITE
LITHIUM NLGI #2 GREASE
TO THE ENDS OF THE BRAKE
SHOES AND IN THE SHOE
MOUNTING SLOTS AS SHOWN.
USE A BRUSH TO APPLY LIBERAL
AMOUNTS OF WHITE LITHIUM NLGI #2
GREASE TO THE AREAS INDICATED.
TURN ADJUSTING
WHEEL SO THAT THE
SHOE SLOT IS VERTICAL
FRONT OF
VEHICLE
17T STAMPING
ON TRAILING
SHOE
;; yy
17T