Page 6-10
6
E
G
Installing the Brake Pedal Assembly - Early 1995 Vehicles, Continued:
2. Attach the equalizer rod (26) to the brake pedal weldment assembly (6) as shown (Figure 6-13).
3. Position and attach the brake pedal assembly and mounting blocks (23) to the vehicle frame as shown.
Tighten the bolts and nuts to 40-60 in.lbs. (4.5/7 N-m) (Figure 6-13). See NOTE below.
4. Install the brake cables (14) on the equalizer rod using the clevis pins (17) and cotter pins (16) that
were removed when the brake pedal assembly was disassembled (Figure 6-13). Tighten the nut (24)
on the equalizer rod so that brake pedal free-play is 1/4 inch to 1/2 inch (6.35 mm to 12.7 mm) (Figure
6-4, Page 6-2). See NOTE at top of next page.
FIGURE 6-13
• EACH HALF OF EACH MOUNTING BLOCK ASSEMBLY IS MARKED WITH AN A OR B. THE
HALVES MARKED A SHOULD BE ORIENTED TO THE TOP LEFT HAND AND BOTTOM RIGHT
HAND SIDES OF THE BRAKE PEDAL ASSEMBLY, AND THE HALVES MARKED B SHOULD BE
ORIENTED TO THE TOP RIGHT HAND SIDE AND BOTTOM LEFT HAND SIDE OF THE BRAKE
PEDAL ASSEMBLY (FIGURE 6-13).
1
2
4
5
3
2
20
21
6
8
7
13
12
9
31
10
11
32
22
24
23
25
28
26
19
29
27
24
30
18
17
16
14
15
STOP
TYPICAL
2 PLACES
TYPICAL
4 PLACES
TYPICAL
4 PLACES
TYPICAL
2 PLACES
TYPICAL
4 PLACES
TYPICAL
2 PLACES
29
NOTE
Summary of Contents for 1996 DS Golf Car Gasoline
