4-9
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 4 Troubleshooting the CTS 500
Managing CTS 500 Hardware Setup
Figure 4-5
Camera Target Placement
Step 8
Raise or lower the CTS 500 so that the green rectangle that displays on the screen is at the approximate
eye level of the CTS 500 user.
Note
If you have a wall-mounted CTS 500, skip this step.
Use the following guidelines when raising and lowering the stand (see
Figure 4-6
and
Figure 4-7
):
•
Do not grasp the light reflector, or any part of the CTS 500 but the monitor.
•
Use two hands.
•
Do not lift using only one side.
•
Apply equal pressure from each side.
205016
5 ft
(1.5 m)
Height
adjustment
knob
Easel
Large
target
