8-15
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 8 Troubleshooting the CTS 1300
Managing CTS 1300 Hardware Setup
Figure 8-10
Long Racetrack Table Positioning
Step 3
Make sure that the camera assembly is level by completing the steps in the
“Removing the Camera Cover
and Leveling the Cameras” section on page 8-8
.
Step 4
Build the easel, and attach the large camera target to the easel, by completing the steps in the
“Attaching
the Large Camera Target to the Easel” section on page 8-11
, making sure that the bottom of the target is
32 inches above the ground.
Step 5
Log in to the Cisco TelePresence System Administration interface.
Step 6
Select the table type by completing the following steps:
a.
Choose Troubleshooting > Hardware Setup.
b.
Click the Configuration radio button. The table configuration window appears, as shown in
Figure 8-2
.
c.
Click the Start button to start testing.
d.
Select the type of table you have from the drop-down menu:
–
Long Straight Table (
Figure 8-11
)
–
Long Racetrack Table (
Figure 8-12
)
–
Short Straight Table (
Figure 8-13
)
10 feet
A
B
30 inches
44 inches
minimum
6 feet minimum,
12 feet maximum,
8 feet recommended
206156
A=B
