3-18
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 3 Configuring the Cisco TelePresence System
SNMP Settings
Step 3
Use Cisco Unified CM to make changes to the SNMP settings. See the
Cisco Unified Communications
Manager Configuration Guide for the Cisco TelePresence System
.
Related Information
For more information about SNMP, see the following information on Cisco.com:
•
MIBs, RFCs, and SNMP Trap Messages for the Cisco TelePresence System
•
Simple Network Management Protocol (SNMP)
home page.
Table 3-4
SNMP Settings
Field
Settings
Engine ID
Identifies the local or remote SNMP engine. The remote agent
SNMP engine ID and user password are used to compute
authentication and privacy digests.
SNMP Configuration
Parameters that access the SNMP server associated with this
Cisco TelePresence System. Cisco Unified CM for CTS supports
SNMP Version 2c and Version 3. SNMP fields displayed in this
window reflect the configured SNMP version. The following fields
are included:
•
SNMP Enabled
•
User ID
•
Security Level
•
Authentication Algorithm
•
Encryption
•
System Location
•
System Contact
•
Read-Only Community String
•
Read-Write Community String
Trap Receiver Configuration
SNMP settings for the receiver to which this Cisco TelePresence
system will send
traps
. The following information is shown for
Traps 1 through 5:
•
Trap Receiver
•
IP Address
•
User ID
•
Security Level
•
Authentication Algorithm
•
Encryption
•
Community String
