4-8
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 4 Troubleshooting the CTS 500
Managing CTS 500 Hardware Setup
Figure 4-3
Cameras Screen
Step 5
Click Show Camera Target. A red
+
appears on the test screen, as shown in
Figure 4-4
.
Figure 4-4
Show Camera Target
Step 6
Prepare the large camera target and place it on the easel.
Step 7
Set the easel and large target in the position that the user will occupy. Use the distance measured from
the camera to the head of the user to position the target. If the distance is unknown, use 1.5 meters
(5 feet).
Note
The user must be at least 4 feet (1.2 meters) away from the display for all CTS 500 installations.
Figure 4-5
shows a pedestal stand-mounted CTS 500. Use the same method for all types of CTS 500
installations.
