10-17
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 10 Troubleshooting the CTS 3010 and CTS 3210
Managing CTS 3010 and CTS 3210 Hardware Setup
•
Cisco TelePresence System 3010 Assembly, Use & Care, and Field Replacement Unit Guide
•
Cisco TelePresence System 3210 Assembly, Use & Care, and Field Replacement Unit Guide
•
For more system troubleshooting information, see the
Cisco TelePresence System Troubleshooting
Guide
on Cisco.com.
Testing Speakers
The speakers are set up successfully when sound can be heard clearly from each one. When running a
test, you can choose whether to cycle through the speakers automatically or manually.
Use the information in the following sections to test the speakers for your system:
•
Testing the Speakers, page 10-17
•
Troubleshooting Speakers, page 10-17
•
Related Information, page 10-18
Testing the Speakers
To test the speakers:
Step 1
Log in to the Cisco TelePresence System Administration interface.
Step 2
Choose Troubleshooting > Hardware Setup
Step 3
Click the Speakers radio button.
Step 4
Click Start to begin the speaker test.
Step 5
Click Cycle Through Speakers to have sound cycled automatically for 5 seconds on each speaker.
Step 6
Click Manually Step Through Speakers to test sound on each speaker.
Step 7
Click Next Speaker to progress to the next speaker.
Step 8
Click Stop to end testing.
Troubleshooting Speakers
Use the information in
Table 10-3
to troubleshoot speakers.
