4-17
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 4 Troubleshooting the CTS 500
Managing CTS 500 Hardware Setup
To focus the camera:
Step 1
Adjust the Focus Distance using these guidelines:
•
If the user is 1.2 meters to 1.5 meters (4 to 5 feet) away from the display, click 4 feet.
•
If the user is farther than 1.5 meters (5 feet) away, click 6 feet.
Step 2
Click Apply.
Step 3
Click Show Focus Targets.
Step 4
Reposition the targets by completing the following steps:
a.
Lean the large target against a chair or other surface so that it is taller than it is wide.
b.
Move the large target 6 to 8 feet (1.8288 to 2.4384 meters) from the camera so that the red box
encloses some of the patterns on the large target when you view the display, as shown in
Figure 4-11
.
c.
Use the easel to support the small target, as shown in
Figure 4-11
.
d.
Place the small target approximately 0.9 meters (3 feet) in front of the camera so that the green box
encloses some of the patterns on the small target when you view the display, as shown in
Figure 4-12
.
Note
Make that there are no objects between the targets and the camera.
