4-14
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 4 Troubleshooting the CTS 500
Managing CTS 500 Hardware Setup
Figure 4-9
Camera Adjustment Options
Step 3
Click Auto Adjust to automatically adjust the lighting and color balance.
Note
Make sure that the large target is still in place and that nothing is between the large target and
the camera.
The camera calibrates and saves the settings. This process takes approximately 20 seconds.
Note
If the test fails, you may need to add more light to the room.
Step 4
Click Show Focus Target. Red and green targets appear on the test screen, as shown in
Figure 4-10
.
Note
To remove the targets, click Hide Focus Target.
