3-11
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 3 Configuring the Cisco TelePresence System
Network Settings
Network Settings
You can view or configure the following settings in the Network Settings window:
•
Operational VLAN ID, page 3-11
•
Administrative VLAN ID, page 3-12
•
Syslog Address, page 3-12
Operational VLAN ID
This field shows a display-only VLAN ID that is standard for networks with a Cisco Unified IP phone.
DHCP Enabled:
Indicates whether Dynamic Host Configuration Protocol (DHCP) has
been enabled for the CTS primary codec.
•
If you select the No radio button in the DHCP Enabled field, you can
update the following available fields:
–
Domain Name
–
IP Address
–
Subnet Mask
–
Default Gateway
–
DNS Server 1
–
DNS Server 2
•
If you select the Yes radio button in the DHCP Enabled field, no
configurable fields are available unless you click the Yes radio
button to Use Static IP Address.
Domain Name:
Indicates the domain name for the primary codec. This field is
configurable only if you select the No radio button for DHCP Enabled.
Use Static IP Address:
Indicates whether the CTS primary codec is configured to use a static IP
address. Static IP address is disabled by default. Click the Yes radio
button to update the following fields:
•
IP Address
•
Subnet Mask
IP Address
IP address for the Cisco TelePresence system. This field is configurable
only if you select the No radio button for DHCP Enabled.
Subnet Mask
Subnet mask used for the IP address supplied. This field is configurable
only if you select the No radio button for DHCP Enabled.
Default Gateway
Default gateway for the CTS primary codec. This field is configurable
only if you select the No radio button for DHCP Enabled.
DNS Server 1 and 2
IP addresses of the Domain Name System (DNS) servers. This field is
configurable only if you select the No radio button for DHCP Enabled.
Table 3-1
IP Settings
Field or Button
Setting
