8-19
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 8 Troubleshooting the CTS 1300
Managing CTS 1300 Hardware Setup
Figure 8-14
Camera Target Menu
Step 11
Automatically adjust the cameras by completing the following steps:
a.
In the Auto Brightness field, perform one of the following actions:
•
If the room uses outside lighting, or has any other conditions that could cause variable room
lighting, click the Enable radio button.
•
If your room lighting is not variable, leave the default value.
b.
In the Auto Color Balance field, perform one of the following actions:
•
If the room uses outside lighting, or has any other conditions that could cause variable room
lighting, click the Enable radio button.
•
If your room lighting is not variable, leave the default value.
c.
In the 50 Hz Flicker Reduction field, click the Disable radio button.
