8-22
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 8 Troubleshooting the CTS 1300
Managing CTS 1300 Hardware Setup
Figure 8-17
Location of Focus and Zoom Ring
Step 8
Adjust the camera mounting plate to center the red plus sign (
+
) on the display inside the black plus sign
(+) on the target, as shown in
Figure 8-18
.
Figure 8-18
Remove Camera Target
Figure 8-19
shows the screws that you use to adjust the camera. Use a 2.5 mm Allen wrench.
•
Use the top two screws for left and right adjustment.
•
The lower screw for up and down adjustment.
•
The screws in the middle for adjustments on the horizontal plane (rotational).
Focus ring
Zoom ring
206131
