3-12
Cisco TelePresence System Administration Guide
OL-21845-01
Chapter 3 Configuring the Cisco TelePresence System
Cisco Unified Communications Manager Settings
Administrative VLAN ID
The CTS must have a VLAN membership ID before it can proceed with a DHCP request for an IP
address.
To view or configure the administrative VLAN ID:
Step 1
Choose Configuration > Network Settings.
Step 2
Enter an administrative VLAN ID for Cisco TelePresence in this field.
Note
The Apply and Reset buttons become active when a value is entered in this field.
Step 3
Click Apply to register a new or modified setting.
Step 4
Click Reset to restore the administrative VLAN ID setting displayed when you opened this window.
Syslog Address
This field shows the display-only syslog address that is standard for networks with a Cisco Unified IP
phone, as shown in
Figure 3-7
.
Figure 3-7
Network Settings Syslog Address
Note
You must also configure the External Syslog Address in the Product Specific Configuration Layout field
for your CTS. See the
Cisco Unified Communications Configuration Guide for the Cisco TelePresence
System
.
Cisco Unified Communications Manager Settings
To specify TFTP server locations and view a list of available settings for this Cisco TelePresence system:
Step 1
Choose Configuration > Cisco Unified Communications Manager Settings. The Cisco Unified
Communications Manager Settings window appears, as shown in
Figure 3-8
.
