CLI Modes
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
25
Alcatel-Lucent
Beta
Beta
CLI Configuration Guide
R
OUTER
C
ONFIGURATION
M
ODE
(RCM)
From the CM, you can enter the Router Configuration Mode (RCM). In this mode,
you can enter into any specific application by entering the corresponding name
such as OSPF, BGP, RIP, IP NAT, IP filter, firewall, etc.
Router configuration mode is used for configuring all the routing protocols.
E
XAMPLE
ALU(config)# router ospf 42
ALU(config-router ospf 42)#
E
XITING
C
ONFIGURATION
M
ODES
You can exit from the current configuration session by typing End, Ctrl-C, Ctrl-Z
and return to the UM/SUM mode. You can use the Exit command in any
configuration mode to return to the previous configuration mode.
E
XAMPLE
ALU# configure
Enter configuration commands, one per line. End with CNTL/Z.
ALU(config)# interface GigabitEthernet 7/0
ALU(config-if GigabitEthernet7/0)# ^Z
ALU#
Command (in CM)
Description
router bgp
<
1-65535>
Enters BGP router configuration mode.
router ospf
<
1-65535>
Enters OSPF router configuration mode.
router rip
Enters RIP router configuration mode.
ip filter <name>
Enters Filter configuration mode.
ip nat <name>
Enters NAT configuration mode.
Command (in CM)
Description
end
or
^Z
^C
Ends the current configuration session (from any
configuration mode) and returns to SUM.
exit
Exits the current configuration mode and returns to the
preceding mode. For example, you can enter this
command to exit from CM to SUM or from ICM to CM.
top
This command enables you to go one step above from the
mode you are currently in. For example, if this command is
entered in the ICM, control moves to the CM.
Summary of Contents for OmniAccess 700
