Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 218 / 1193

Per VLAN Spanning Tree +
Left running head:
Chapter name (automatic)
192
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
E
XAMPLE
2
ALU(config)# show spanning-tree brief vlan 1
VLAN1
Spanning tree enabled protocol IEEE
ROOT ID Priority 32768
Address 00.11.8b.00.27.12
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address 00.11.8b.00.27.12
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Port Designated
Name Port ID Prio Cost Sts Cost Bridge ID Port ID
-------------- ------- ---- ---- --- ---- ----------------
switchport1/0 128.8 128 4 FWD 0 00.11.8b.00.27.12 128.8
switchport1/1 128.7 128 4 FWD 0 00.11.8b.00.27.12 128.7
switchport1/2 128.6 128 4 FWD 0 00.11.8b.00.27.12 128.6
switchport1/3 128.5 128 4 FWD 0 00.11.8b.00.27.12 128.5
switchport1/4 128.4 128 4 FWD 0 00.11.8b.00.27.12 128.4
switchport1/5 128.3 128 4 FWD 0 00.11.8b.00.27.12 128.3
switchport1/6 128.2 128 4 DIS 0 00.11.8b.00.27.12 128.2
switchport1/7 128.1 128 4 DIS 0 00.11.8b.00.27.12 128.1
T
O
V
IEW
S
UMMARIZED
PVST+ D
ETAILS
E
XAMPLE
1
ALU# show spanning-tree summary
Name Blocking Listening Learning Forwarding STP Active
--------- -------- --------- -------- ---------- ----------
VLAN1 7 0 0 1 8
VLAN2 0 0 0 1 1
VLAN3 0 0 0 1 1
--------------- -------- --------- -------- ----------------
3 VLANs 7 0 0 3 10
ALU#
Command (in SUM/CM) Description
show spanning-tree summary
This command displays the summary of
the spanning tree information.