T1E1 Line Card
Left running head:
Chapter name (automatic)
256
Beta
Beta
CLI Configuration Guide
Alcatel-Lucent
T1 C
ONFIGURATION
Refer to the following sections to configure a T1 line card on your OA-700:
•
“T1 Configuration Steps”
•
“T1 Configuration Flow”
•
“T1 Configuration Commands”
•
“T1 Show Commands”
•
“Troubleshooting T1 Lines”
T1 C
ONFIGURATION
S
TEPS
Following are the steps to configure T1 interface:
Step 1:
Set the card type to T1 “
“To Set the Card type to T1”
Step 2:
Enter Controller Configuration Mode. See
“To Configure T1 Controller”
Step 3:
Configure channel-groups on the controller before entering into interface
configuration mode. See
“To Configure Channelized T1”
. This command creates a
channel-group that will form a channelized serial interface.
Step 4:
Administratively bring up the T1 controller. See
“To Bring Up/Shutdown
the T1 Controller”
Step 5: Configure Optional parameters for T1. See
“Configure Optional
Parameters for T1 Controller”
•
Configure cablelength. See
“To Configure a Short Cablelength”
,
“To
Configure a Long Cablelength”
•
Configure framing. See
“To Configure Framing on T1”
•
Configure linecoding scheme. See
“To Configure Linecoding on T1”
•
Configure clocksource. See
“To Configure Clocksource”
Step 6:
Enter Interface Configuration Mode to configure the channelized serial
interface. See
“To Configure a Serial Interface”
Note:
Creation of a channel-group is a pre-requisite prior to configuring a serial interface.
Summary of Contents for OmniAccess 700
