Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 625 / 1193

VRF-CE Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
599
Alcatel-Lucent
Beta Beta
OA-780 CLI Configuration Guide
T
O
C
ONFIGURE
RIP
IN A
VRF
Note:
1. All the RIP commands executed in the RIP Global Configuration Mode will apply
to the default VRF.
2. All the RIP commands executed in the address family mode will apply to the VRF
if the address family is associated with the VRF.
3. There is no change in the syntax of the existing RIP commands. Only those
affected by VRF-CE are listed in this document.
E
XAMPLE
ALU(config)# router rip
ALU(config-router rip)# address-family ipv4 unicast vrf ALU_vrf
Command (in RCM) Description
address-family ipv4 unicast
vrf <vrf-name >
Enter this command in the RIP Routing
Configuration Mode.
This command associates the address family
with the VRF and enters the VRF
configuration mode.