Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 28 / 1193

CLI Configuration Guide
Left running head:
Chapter name (automatic)
2
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
O
RGANIZATION
The chapters in the CLI Configuration Guide are organized into seven parts.
P
ART
I - I
NTRODUCTION
The first part provides an introduction to CLI, “The Command Line Interface” in
Chapter 2 . This is a preparatory chapter that describes the CLI configuration
considerations, tools required, an overview of the Command Line Interface and
procedures that should be performed before the actual configuration.
Chapter 3 “System Configuration and Monitoring” provides an overview of the
system level commands required to troubleshoot, monitor, connect the system to
the network. This chapter also includes commands for Inband and Out-of-band
management, setting system parameters, software management, configuration
management, AAA services, SNMP, etc. The various commands described
include SSH, Telnet, show version, update, show environment, show mem, show
proc, etc.
Chapter 4 “Virtual Router Redundancy Protocol” details a study on VRRP
implementation on the OA-700. It is a method of providing nonstop path
redundancy and gateway redundancy for an enterprise network by sharing
protocol and Media Access Control (MAC) addresses between redundant
gateways.
P
ART
II - LAN I
NTERFACES
This part introduces the commands and steps to configure the LAN interfaces. It
gives a succinct overview on the Ethernet Interface configuration in
Chapter 5
“Ethernet Interfaces on SE” .
The Bridging configuration in Chapter 6 “Layer 2 Switching Configuration”
deals with the L2 switching Configuration on the OA-700. The chapter is
organized with the L2 switching overview, configuration details in the first few
sections and the configuration scenario in the end to give a real time example for
configuring switching.
Chapter 7 “Per VLAN Spanning Tree +” details the VLAN commands in
switching.
Chapter 8 “Integrated Routing and Bridging” deals with Switching
configuration integrated with routing.
Chapter 9 “802.1X Port-Based Authentication” describes how to configure
IEEE 802.1X port-based authentication on the OA-700.