manualshive.com logo in svg

Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Share
Download
Alcatel-Lucent OmniAccess 700 Cli Configuration Manual Download Page 1161

Software Licenses and Acknowledgements

Except on the first page, right running head:  
Heading1 or Heading1NewPage text (automatic)

43

Alcatel-Lucent

Beta

Beta

CLI Configuration Guide

Pittsburgh, PA 15213-3890

(412) 268-4387, fax: (412) 268-7395

[email protected]

4. Redistributions of any form whatsoever must retain the following 
acknowledgment:

This product includes software developed by Computing Services at Carnegie 
Mellon University (http://www.cmu.edu/computing/). 

CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH 
REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CARNEGIE 
MELLON UNIVERSITY BE LIABLE FOR ANY SPECIAL, INDIRECT OR 
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER 
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, 
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
OF THIS SOFTWARE.

Copyright (c) 1993-2002 Paul Mackerras. All rights reserved. Redistribution and 
use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list 
of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this 
list of conditions and the following disclaimer in the documentation and/or other 
materials provided with the distribution.

3. The name(s) of the authors of this software must not be used to endorse or 
promote products derived from this software without prior written permission.

4. Redistributions of any form whatsoever must retain the following 
acknowledgment:

This product includes software developed by Paul Mackerras 
<[email protected]>".

THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH 
REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE 
LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR 
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR 
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR 
OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH 
THE USE OR PERFORMANCE OF THIS SOFTWARE.

Copyright (c) 1991 Gregory M. Christy. All rights reserved.

Redistribution and use in source and binary forms are permitted provided that the 
above copyright notice and this paragraph are duplicated in all such forms and 
that any documentation, advertising materials, and other materials related to such 
distribution and use acknowledge that the software was developed by Gregory M. 
Christy. The name of the author may not be used to endorse or promote products 
derived from this software without specific prior written permission.

Summary of Contents for OmniAccess 700










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands