System Configuration and Monitoring
Left running head:
Chapter name (automatic)
48
Beta
Beta
CLI Configuration Guide
Alcatel-Lucent
T
ELNET
Telnet is a user command with an underlying TCP/IP protocol for accessing
remote computers. Telnet is a program that enables connection to foreign or
remote host computers.
Telnet is not secure like SSH, but Telnet is supported on almost all Operating
Systems.
•
Inbound Telnet access to the system is disabled by default. It is mandatory to
have a user account configured for this. (See
“AAA Configuration on OA-700” on
page 58
)
.
•
Outbound Telnet access is allowed for the user once the user has been
authenticated. Telnet access from the system is always enabled.
E
XAMPLE
ALU(config)# telnet enable
ALU(config) telnet 10.91.0.1
Note:
For more information on connecting the system to the internal network, refer to the
“Connecting the System to the Network” section in the
OA-780 Hardware Users
Guide.
There is a limit on the number of non-console CLI sessions, using SSH, Telnet, and
modem. For OA-780, the limit is four sessions and for OA-740, it is two sessions. This
excludes the console session.
HTTP (H
YPER
T
EXT
T
RANSFER
P
ROTOCOL
)
HTTP is the primary protocol used for the transfer of files over the World Wide
Web. You can access the OA-700 using HTTP through a web browser after being
authenticated. By default, the access is disabled.
E
XAMPLE
ALU(config)# http enable
Command (in UM)
Description
telnet
{
enable
|
disable
}
Use this command to enable/disable the
Telnet service.
telnet
[
vrf
<vrf-name>
]
{<
ip-
address>
|<
hostname>
}
This command starts a Telnet connection
to a remote computer.
Command (in UM)
Description
http
{
enable
|
disable
}
Use this command to enable/disable the
HTTP service.
Summary of Contents for OmniAccess 700
