Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 1039 / 1193

DNS Client Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1013
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
DNS C
LIENT
C
ONFIGURATION
C
OMMANDS
T
O
E
NABLE
/D
ISABLE
IP D
OMAIN
L
OOKUP
E
XAMPLE
ALU(config)# ip domain-lookup
ALU(config)# no ip domain-lookup
T
O
S
PECIFY
DNS S
ERVER
E
XAMPLE
ALU(config)# ip name-server 1.1.1.1 1.1.1.2 1.1.1.3
ALU(config)# ip name-server 1.1.1.1 primary
ALU(config)# ip name-server 1.1.1.2 secondary
ALU(config)# no ip name-server 1.1.1.1
Command (in CM) Description
ip domain-lookup
This command is used to enable the
system to query the DNS server (s) for
name/address translation.
By default, domain lookup is enabled.
no ip domain-lookup
This command is used to disable the
domain lookup.
Command (in CM) Description
ip name-server < ip-address...>
[{ prefer | primary | secondary | ter
tiary }]
This command is used to add DNS
server to which the resolution requests
are be sent.
You can add maximum of three DNS
servers, and specify the order of
preference to them individually - Primary,
Secondary, Tertiary.
Primary is tried first, then the Secondary,
and lastly Tertiary. Secondary and
tertiary name servers are tried only the
query sent to the primary server is not
successful.
"Prefer" is the same as "primary".
no ip name-server < ip-
address...>
[{ prefer | primary | secondary |
tertiary }]
This command is used to remove a
name server.
If the ordinal is specified, the removal is
only successful if the given address is in
that ordinal location.