OSPF Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
511
Alcatel-Lucent
Beta
Beta
CLI Configuration Guide
OSPF C
ONFIGURATION
This section includes the following:
•
“OSPF Configuration Steps”
•
“OSFP Configuration Flow”
•
“OSPF Configuration Commands”
•
“Show Commands in OSPF”
•
“Clear Commands in OSPF”
OSPF C
ONFIGURATION
S
TEPS
The steps given below helps in configuring and running basic OSPF on the
OA-700.
Step 1 to Step 5 are the minimum configuration requirements for enabling
OSPF. Step 6 describes other important but optional configuration
commands for OSPF.
Step 1:
Configure an interface. Enter Interface Configuration Mode.
ALU(config)# interface <
name
>
Example:
ALU(config)# interface
GigabitEthernet7/0
ALU(config-if GigabitEthernet7/0)#
Note:
OSPF can be configured on GigabitEthernet, Serial, Tunnel, VLAN, Loopback
interfaces.
Step 2:
Administratively bring up the interface
ALU(config-if <
interface-name
>)# no shutdown
Example:
ALU(config-if GigabitEthernet7/0)# no shutdown
Step 3:
Configure IP address for the interface
ALU(config-if <
interface-name
>)# ip address {
<ip-
address subnet-mask>|<ip-address/prefix-length>
}
Example:
ALU(config-if GigabitEthernet7/0)# ip address
20.20.20.20/24
Step 4:
Enable OSPF. See
“To Enable OSPF”
Summary of Contents for OmniAccess 700
