Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 41 / 1193

CLI Modes
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
15
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
CLI M
ODES
Each mode has a specific set of commands and you can navigate between the
modes using a specific set of commands.
Figure 1: Configuration Modes
LOGIN
User Mode (UM)
Router>
Super User Mode (SUM)
Router#
Configuration Mode (CM)
Router(Config)#
Router Configuration Mode
(RCM)
Interface Configuration Mode
(ICM)
Application
Router>en
Router# Config t
Interface
This mode is accessed from
the CM. Enters into a specific
application. For ex: BGP, RIP,
OSPF, Firewall, Filter, NAT,
IPSec, Time-Range etc.
This mode is accessed from
the CM. Many features are
enabled on a per-interface
basis. ICM commands modify
the operation of an interface
.
Sub-Interface Configuration
Mode (S-ICM)
•Show Commands
•Monitor Command
•Ping and ssh
•Enter SUM
•Reset Counters
•Clear Commands
•Debug Commands
•Enter Config-mode
This mode is accessed from
Interface Configuration Mode
This is a sub-mode of the ICM.
End / Ctrl-Z
Exit
Exit
Exit
End / Ctrl-Z
End / Ctrl-Z