Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 91 / 1193

AAA Configuration on OA-700
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
65
Alcatel-Lucent
Beta Beta
CLI Configuration Guide
T
O
A
DD
A S
ERVER
T
O
T
HE
S
ERVER
G
ROUP
E
XAMPLE
ALU(config-srv-grp-tac1)# tacacs-server 1.1.1.2
ALU(config-srv-grp-tac1)# no tacacs-server 1.1.1.2
T
O
C
ONFIGURE
S
ERVER
G
ROUP
G
LOBAL
O
PTIONS
Note: In the Configuration Mode, you can configure server global options like
timeout, key, and authentication port. You can also configure these values on a per
server basis. Per-server values should be entered in the Server Group
Configuration Mode.
The per-server parameters override the global ones, in case both are configured.
Default global values for these parameters exist that will come into effect if neither per-
server nor global values are configured explicitly.
The following are the server options:
•
Authentication Port (auth-port): This is the destination port on which
server is listening.
•
Key: This is the encryption key between the OA-700 and the server.
•
Timeout: This determines the number of seconds that the OA-700 should wait for
a reply from the server before retrying.
Command (in Server
Group CM)
Description
tacacs-server <ip-address>
[{ auth-port < 1-1000 >| key { 5
[ <string> ]| <string >}
| timeout < 1-1000 >}]
This command is used to add the
server of the specified IP address into the
server group.
You can also specify the server specific
parameters like auth-port port-number, time-
out, and key string.
no tacacs-server <ip-
address>
This command removes a Server
from the server group.