Alcatel-Lucent OmniAccess 700, Cli Configuration Manual

Page: 922 / 1193

Telephony Services
Left running head:
Chapter name (automatic)
896
Beta Beta
CLI Configuration Guide
Alcatel-Lucent
T
O
C
ONFIGURE
D
IAL
P
LAN FOR
L
OCAL
C
ALLS
E
XAMPLE
1. In the following example, only 3 (extension) digits call will be successful. All
other calls will be dropped.
ALU(telephony-service)# telephony-default-dialplan dest-num-
pattern [0-9]{3}
2. In the following example, only 6 digits call will be successful:
ALU(telephony-service)# telephony-default-dialplan dest-num-
pattern [0-9]{6}
3. In the following example, calls to phones having 3 characters followed by 2
digits will be successful:
ALU(telephony-service)# telephony-default-dialplan dest-num-
pattern ([a-z]{3}[0-9]{2})
Command (in Telephony Service
Mode)
Description
telephony-default-dialplan
dest-num-pattern < number-
pattern >
This command is used to configure the
dial plan for local numbers (within the
LAN) registered with the call servers.
Note: Destination number pattern
is based on the PCRE
standard.
The number pattern can be a
maximum of 64 characters.
no telephony-default-dialplan
This command removes the configured
dial plan for local numbers, and reverts to
its default pattern “telephony-default-
dialplan dest-num-pattern ([0-9]{4})”